路由器的配置文件可以存放在tftp,rcp或MOP服务器中,通过一定的设置,路由器在启动后可以自动下载路由器配置文件。路由器需要下载两个文件,也可以下载其中的一个文件,这个文件合在一起成为运行的配置。
该文件包含有几个路由器共同的配置文件。
该文件包含有某台路由器特有的配置信息。
这两个文件可用任何纯文本编辑器进入编辑
一般地,要从tftp服务器中下载配置文件的网络拓朴,如图:

下载网络共用文件的配置步骤
service config
boot network tftp 网络共用配置文件名 tftp服务器IP地址
ip address 本地端口IP地址 子网掩码
下载私有配置文件配置步骤
service config
boot host tftp私有配置文件名 tftp服务器IP地址
ip address 本端口IP地址 子网掩码
实例:
current configuration:
!
version 11.2
service config
no service udp-small-servers
no service tcp-small-servers
!
hostname kim
!
boot host try-host 10.1.1.33
!从地址为10.1.1.33的tftp服务器中下载名为try-host的私有配置文件
boot network try-network 10.1.1.33
!从地址为10.1.1.33的tftp服务器中下载名为try-network的网络共用文件
boot system flash
boot system tftp c2500-j-l-112-9_p.bin 10.1.1.33
boot system rom
!
!
interface Ethernet0
ip address 10.1.1.33 255.255.255.0
no ip mroute-cache
no ip route-cache
!
interface Serial0
no ip address
no ip mroute-cache
no ip route-cache
!
interface Serial1
no ip address
no ip mroute-cache
no ip route-cache
shutdown
!
no ip classless
!
line con 0
line 1 8
transport input all
line aux 0
transport input all
line vty 0 4
login
!
end
try-network文件内容
ip host kim 10.1.1.1
ip host try 10.1.2.1
ip host try 10.1.3.1
chat-sc lab ABORT ERROR ABORT BUSY “” ATDT \T” TIMEOUT 60 CONNECT \c
try-host文件内容
!
version 11.2
service config
no service udp-small-servers
no service tcp-small-servers
!
hostname kim
!
boot host try-host 10.1.1.33
boot network try-network 10.1.1.33
boot system Flash
boot system c2500-j-l_112-9_p.bin 10.1.1.33
boot system rom
!
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
no ip mroute-cache
no ip route-cache
!
interface Serial0
ip address 10.1.2.1 255.255.255.0
no ip mroute-cache
no ip route-cache
!
interface Serial1
no ip address
no ip mroute-cache
no ip route-cache
shutdown
!
no ip classless
!
line con 0
line 1 8
transport input all
line aux 0
transport input all
line vty 0 4
login
!
end