前一页
| Router A | dlsw local-peer peer-id 5.0.0.1 dlsw remote-peer 0 tcp 150.150.10.1 dlsw bridge-group 4 interface ethernet 0 ip address 5.0.0.1 255.255.255.0 bridge-group 4 bridge 4 protocol ieee |
Router B | source-bridge ring-group 2000 dlsw local-peer peer-id 150.150.10.1 dlsw remote-peer 0 tcp 5.0.0.1 interface Serial 0 encapsulation sdlc clockrate 9600 sdlc role primary sdlc vmac 4000.9999.0100 sdlc address 01 sdlc xid 01 05d20006 sdlc partner 4000.1020.1000 01 sdlc dlsw 1 interface loopback 0 ip address 150.150.10.1 255.255.255.192 |
|---|
NOTES:
- DLSw in IOS 10.3(2) through IOS 10.3(5.2) is not compatible with DLSw in Cisco IOS 10.3(5.3) and later.
- When using a 5394 controller, IBM RPQ 8Q0775 titled "IBM 5394 PU 2.1" is required.
- This works for either PU 2.0 or PU 2.1 SDLC device; mixing PU type is supported in Cisco IOS 11.1.
Requires Cisco IOS 10.3 or greater
前一页