前一页
| NCP side of the network | dlsw local-peer peer-id 172.16.252.1 dlsw remote-peer 0 tcp 172.16.254.1 dlsw remote-peer 0 tcp 172.16.250.1 ! interface Loopback0 888 Logical interface used to map remote peers ip address 172.16.252.1 255.255.255.0 ! interface Serial0 888 Serial Connection to PG Mainframe no ip address encapsulation sdlc no keepalive clockrate 56000 sdlc role secondary sdlc vmac 4000.0000.0100 sdlc address C1 sdlc partner 0004.f5e4.7772 C1 sdlc address C2 sdlc partner 0001.fa28.2ce0 C2 sdlc address C3 sdlc partner 0001.fa2b.c1fa C3 sdlc dlsw C1 C2 C3 |
Router B | source-bridge ring-group 100 dlsw local-peer peer-id 172.16.250.1 dlsw remote-peer 0 tcp 172.16.252.1 dlsw bridge-group 1 ! interface Loopback0 888 Logical interface used to map remote peers ip address 172.16.250.1 255.255.255.0 ! interface Ethernet0 888 First production ethernet segment ip address 172.16.1.1 255.255.255.0 ipx network 2 media-type 10BaseT bridge-group 1 |
|---|
NOTES:
- DLSw in IOS 10.3(2) through IOS 10.3(5.2) is not compatible with DLSw in Cisco IOS 10.3(5.3) and later.
- This works for either PU 2.0 or PU 2.1 SDLC device
- Multidrop PU 2.1 is supported in IOS 11.0
- Mixing PU type is supported in Cisco IOS 11.1.
Requires Cisco IOS 10.3 or greater
前一页